Coleman Lantern Generators                        
Model Number  Fuel Candle Power  Lantern Model   Gas Tip Stamp   Orafice Diam Obsolete / Available   Building a Replacement & Notes Length ***   Dia @ Top Dia @ Body  Dia @ Bottom Tip Cleaning Rod Length Stuffing Material  Generator Material 
G2 C Fuel 125 222 4        Obsolete / Unavailable  Was replaced with G2A 3.045"   0.185" 0.250" 0.310"   tip cleaning rod steel spring & cardboard  brass
G2A C Fuel 125  222-a-b 4 or T   Obsolete/ Available Has been replaced with 222A-2991 3.045"   0.185" 0.250" 0.310" 3.080" tip cleaning rod steel spring & cardboard  brass
G3 C Fuel 350 331 335 321-a-b E or C   Obsolete/ Available Was replaced with G3A  3.925"   0.250" 0.250" 0.310" 3.955" tip cleaning rod steel spring & cardboard  brass
G3A C Fuel 350 321C 335P E or 6   Obsolete/ Available Has been replaced with 335B-2991   3.925"   0.250" 0.250" 0.310" 3.955" tip cleaning rod steel spring & cardboard  brass
G4 C Fuel 300 325 6   Obsolete/ Available Has been replaced with 325-2991   3.925"   0.250" 0.250" 0.310" 3.955" tip cleaning rod steel spring & cardboard  brass
G5 C Fuel 500 625 R   Obsolete/ Available Has been replaced with 635-2991 4.545"   0.250" 0.250" 0.310" 4.585" tip cleaning rod steel spring & cardboard  brass
G6 C Fuel 500 635 621-a-b-c R   Obsolete/ Available Has been replaced with 635-5891 4.545"   0.250" 0.250" 0.310" 4.585" tip cleaning rod steel spring & cardboard  brass
G6A C Fuel 500 621D R   Obsolete/ Available Has been replaced with 635-5891 4.545"   0.250" 0.250" 0.310" 4.585" tip cleaning rod steel spring & cardboard  brass
G7 C Fuel 300 325A 6   Obsolete/ Available   Has been replaced with 325-2991 3.500"   0.250 " 0.250" 0.310" 3.495" tip cleaning rod steel spring & cardboard  brass
G8 C Fuel N/A 519  Heater C        Obsolete / Unavailable    4.450"   0.250" 0.250" 5/16 40 TPI 4.970" tip cleaning rod steel spring & cardboard  brass
G9 C Fuel 500 625A R   Obsolete/ Available Has been replaced with 625A-2991 4.125"   0.250" 0.250" 0.310" 4.120" tip cleaning rod steel spring & cardboard  brass
K3 Kerosene 350 339 3      Obsolete/ Available ? Cut K6 to correct Length & Flare Use G3-a or G4 cleaning rod & 3 Gas tip 3.925"   0.250" 0.310" 0.310" 3.955" tip cleaning rod & 2 brass springs  brass
K6 Kerosene 550 639-a-b C or E   Obsolete/ Available Has been replaced with 639B-2992 4.545"   0.250" 0.310" 0.310" 4.585" tip cleaning rod & 2 brass springs  brass
P3 Propane 300 5417 P        Obsolete / Unavailable  Was replaced with 5417-299 3.925"   0.250" 0.250" 0.310" 3.955" tip cleaning rod steel spring & cardboard  brass
P5 Propane 300 5414 6        Obsolete / Unavailable  Was replaced with 5414-299           Has 3/8" 24 TPI collar with ferule for sealing gen body in to the fuel valve. Gen has 0.110" offset in middle of gen body 3.590"   0.185" 0.185" 0.185" NA         none brass
P9 Propane 300 5419  I        Obsolete / Unavailable   Has 3/8" 24 TPI collar with ferule for sealing gen body in to the fuel valve 4.810"   0.185" 0.185" 0.185" NA         none brass  
P10 Propane 300 5419A  I        Obsolete / Unavailable   Has 3/8" 24 TPI collar with ferule for sealing gen body in to the fuel valve 5.585"   0.185" 0.185" 0.185" NA         none brass
T44 C Fuel 300 275 220 228, lamps 118-158  C or V   Obsolete/ Available  Canadian built replacement Gens can have C or V Gas tip. While U.S Built ones have V Gas tip * See Below Has been replaced with 220E-5891 3.575"   0.250" 0.250" 0.250" 3.615" tip cleaning rod steel spring & cardboard  brass 
T44DL C fuel 300 275 220  228, lamps 118-158  V   Obsolete / Unavailable  Double Life Gen  3.575"   0.250" 0.250" 0.250" 3.615" tip cleaning rod steel spring & cardboard  nickle plated brass
T44G Kero-C fuel 300 220BX, lamps 117A 118A 119A 132-a 133 134a-g-p  139 150B-g-i-r  V   Obsolete/ Available The T44 and T44G are interchangable  If Kero is to be used the cardboard and steel spring in the T44 should be replaced with a solid brass spring  3.575"   0.250" 0.250" 0.250" 3.615" Tip cleaning rod & Asbestos type rope around a steel spring brass
T44GS C Fuel 300 See T44-G-DL V   Obsolete/ Available Has a steel generator body possibly a wartime measure to save brass 3.575"   0.250" 0.250" 0.250" 3.615" Tip cleaning rod & Asbestos type rope around a steel spring steel body & brass gas tip
T44K Kerosene ? 235 (231&206 ?), lamps129-a-g 138a-b 150bk-gk-ik-rk    V    Obsolete / Available  Has been replaced with 206A-5891 3.560"   0.250" 0.250" 0.250" ? tip cleaning rod - ?( Internals crimped in)  brass
T51 (151-299) C Fuel 450 lamps 151-b Δ (triangle)   Obsolete / Unavailable  The 151 was a 3 mantle Lamp                 
T66 C Fuel 300 200-a 202 234 242-a-b-c-e 243-a 6   Obsolete/ Available Has been replaced with 200A-5891 3.575"   0.185" 0.250" 0.250" 3.615" tip cleaning rod steel spring & cardboard  brass
T66DL C Fuel 300 200-a 202 234 242-a-b-c-e 243-a 6   Obsolete / Unavailable  Double Life Gen  3.575"   0.185" 0.250" 0.250" 3.615" tip cleaning rod steel spring & cardboard  nickle plated brass
TK66 Kerosene 350  241-a-b-g-k 242k 245 247 3   Obsolete/ Available Has been replaced with 201-5891 3.575"   0.185" 0.250" 0.250" 3.615" tip cleaning rod & brass spring  brass
T88 C Fuel 300  L220 L228, lamps 117 118 119 (slant generator) Q   Obsolete / Unavailable  Use R55                                         A correct replacement can be built using the 603-299 iron gen change tip gas tip to Q 4.480"   0.185" 0.185" 0.185" 4.850" tip cleaning rod & steel spring  brass
Q77 C Fuel 300  220 228 lamps 117 118 119 (slant generator) Q   Obsolete / Unavailable  Use R55                                           Cut a P9 to the correct length and flare the end & use Q Gas tip.       Note: stuffing-filter material will need to be found.  4.480"   0.185" 0.185" 0.185" NA wire wound in asbestos brass
Q99 C Fuel 300 Quicklite CQ lamps  L-Q 327 427  Q   Obsolete / Unavailable  Use R55                                    (Q99 has a loop for match preheating a pre heat cup may be nessesary with the R55 to prevent flaming) 5.00"   0.185" 0.185" 0.185" NA wire wound in asbestos brass & steel nut 
Q99 (Newer Production) C Fuel 300 Quicklite CQ lamps  L-Q 327 427  V   Available  Newer Production Q99 (6 sided Nut) 5.00"   0.185" 0.185" 0.185" NA wire wound in asbestos brass & steel nut 
R55 Kero-C fuel 300-350   All Q77 Q99 T88 aplications 427K Lamps 102K 143A 141 141A 128C 329BC 156 R157 158 159 159X 168K 169K   Q   Obsolete / Unavailable  Has built in roto cleaning lever Has been replaced with 155 B292 4.450"   0.185" 0.250" 0.185" 3.740" filter screen - cleaning rod  brass  & steel nut 
 155 B292 (R55) Kero-C fuel 300-350 See R55  V   Available  Newer production R55 (6 sided Nut) 4.450"   0.185" 0.250" 0.185" 3.740" filter screen - cleaning rod  brass  & steel nut 
236-299 C Fuel 500 236 236A (Primus 1060) Δ (triangle)   Obsolete/ Available Use cleaning rod,small spring from 237 & gas tip R or D from G5 G6-a or G9 on 236 body 4.845"   0.250" 0.250" 0.310" 4.900" tip cleaning rod steel spring & cardboard  brass
237-299 Kerosene 550 237-a U.S built 237B  I   Obsolete / Unavailable  Canadian Built 4.845"   0.250" 0.375" 0.375" 4.900" tip cleaning rod & 2 brass springs  brass
237-2991 Kerosene 550 237-a U.S built 237B  I   Available  U.S  Built 4.845"   0.250" 0.375" 0.375" 4.900" tip cleaning rod & 2 brass springs  brass
237A-299 Kerosene 550 U.S built 237B V   Obsolete / Unavailable   Built for the U.S 237B Replaced with the 237-299 2991 4.860"   0.250" 0.375" 0.375" 4.900" tip cleaning rod & 2 brass springs  brass
238B-299 Kerosene 500 238 238B 238BG  None    Obsolete / Unavailable  Generator is machined from a solid piece of 5/8" brass bar stock, By far the heaviest built Coleman Lantern gen. Does not use the standard Lantern Gas tip. But uses a tip patterned after the 500-299 Stove Gen. Generator has raised rings along the body  5.165"   0.330" Rings Dia. 0.380"-0.562" Width 0.125"-0.075" 0.380" 5.800" tip cleaning rod & 2 brass springs  brass
249-299 Kerosene 350 249-d-e +   Obsolete / Unavailable  Canadian Built 3.585"   0.375" 0.375" 0.375" 3.615" tip cleaning rod & 2 brass springs  brass
249-2991 Kerosene 350 249-d-e +   Obsolete / Unavailable  U.S  Built 3.585"   0.375" 0.375" 0.375" 3.615" tip cleaning rod & 2 brass springs  brass
252 Dual Fuel  300 252-a None   Obsolete/ Available (U.S Military Surplus)   J shaped generator  (mil spec lantern for the U.S Armed Forces) ** See Below 8.635" Total  6.650" Tall   0.185" 0.250" 0.250" NA asbestos type rope  aluminum / brass gas tip
200A-5891 C Fuel 300 200-a 202 234 242-a-b-c-e 243-a 6   Available   New replacement for the T66 3.575"   0.185" 0.250" 0.250" 3.615" tip cleaning rod steel spring & cardboard  brass
201-5891 Kerosene 350 201 TD   Available   New replacement for the TK66 3.570"   0.185" 0.250" 0.250" 3.615" tip cleaning rod & brass or aluminum spring  brass
206A-5891 Kerosene 550 206 V   Available    New replacement for theT44K 3.575"   0.250" 0.250" 0.250" 3.615" tip cleaning rod & brass spring  brass
214-5891 Kerosene 350 214 TD   Available   Kero version of the 288-5891 Gen 3.595"   0.250" 0.250" 0.310" 3.615" tip cleaning rod & aluminum spring brass
214A-5891                              
214B-5891                              
220E-5891 C Fuel 300 275-a 220 228 118-158 lamps V   Available   New replacement for the T44 3.575"   0.250" 0.250" 0.250" 3.615" tip cleaning rod steel spring & cardboard  brass
222A-2991 C Fuel 125 222-a-b 3022 T   Available   New replacement for the G2-a 3.045"   0.185" 0.310" 0.310" 3.080" tip cleaning rod - ?( Internals crimped in)  brass
226-2991 Dual Fuel  125 229 226 266-700 None   Available    3.045"   0.185" 0.310" 0.310" 3.080" tip cleaning rod - ?( Internals crimped in)  brass
231-5891 Kerosene 550 231 ?   Obsolete/ Available ? Possibly the same gen as the 206-5891 or a new TK44 Still reseaching                
285-5891 Dual Fuel  300 282 285 P   Available  Some early gens have additional brass solderd on to the body to increase heat absorbtion  3.585   0.250" 0.310" 0.310" crimped in tip cleaning rod - ?( Internals crimped in)  brass
285A-5891 C Fuel,Unleaded Gasoline,  Gasahol (E10)   300 285A P    ?  Gen 285-5891 should work Select-E-Fuel 285A Was designed to burn up to a 10% Ethanol Gasoline Mix 3.585   0.250" 0.310" 0.310" crimped in tip cleaning rod - ?( Internals crimped in)  brass
288-5891 C Fuel 300  200B 286-a 288 U or P   Available    3.595"   0.250" 0.250" 0.310" 3.615" tip cleaning rod steel spring & brass spring  brass
290-5891 C Fuel 300 290 290A V   Obsolete/ Available Has been replaced with 290-589C   4.535"   0.250" 0.310" 0.310" 4.585" tip cleaning rod & 2 brass springs  brass
290-589C C Fuel 300 290 290A None   Available   4.535"   0.250" 0.310" 0.310" 4.585" tip cleaning rod & 2 brass springs  brass
295-5891 Dual Fuel  300 295 V   Available  Some early gens have additional brass solderd on to the body to increase heat absorbtion  4.535"   0.250" 0.310" 0.310" crimped in tip cleaning rod - ?( Internals crimped in)  brass
325-2991 C Fuel 300 325 6   Available   New replacement for the G4 3.925"    0.250" 0.250" 0.310" 3.955" tip cleaning rod steel spring & cardboard  brass
325A-2991 C Fuel 300 325A     Available   New replacement for the G7               brass
335B-2991 C Fuel 300 331 335 321-a-b-c 6   Available   New replacement for the G3-a 3.925"    0.250" 0.250" 0.310" 3.955" tip cleaning rod steel spring & cardboard  brass
625A-2991 C Fuel 500 625-a  ?    Available   New replacement for the G9               brass
635-2991 C Fuel  500 635 621-a-b-c  ?    ?  New replacement for the G5&G6-a                
635-5891 C Fuel 500 635B R   Available    4.535"   0.250" 0.310" 0.310" crimped in tip cleaning rod - ?( Internals crimped in)  brass
639A-2992 Kero 550 639-a-b  ?    Obsolete/ Available Has been replaced with 639B-2992             4.560"    
639B-2992 Kero 550 639-a-b None   Available New replacement for the 639A-2992 4.545"   0.250" 0.310" 0.310"   tip cleaning rod & 2 brass springs  brass
2000-589R Dual Fuel  550  2000-700 2000-750-a (Northstar)  V   Available    4.545"   0.250" 0.310" 0.310" 4.560" tip cleaning rod & 2 brass springs  brass
5104-299 Butane 300 5104 5121 F   Obsolete / Unavailable  Use T66 or TK66 with F gas tip 3.575"   0.185" 0.250" 0.250" 3.615" tip cleaning rod steel spring & cardboard  brass
5105-505 Butane 300 5101 3   Obsolete / Unavailable  Use T66-TK66 body remove cleaning rod use 3 gas tip and add sutiable stuffing.    3.575"   0.185" 0.250" 0.250" NA 1" of Asbestos type rope Brass filter screen brass   
5105-505 Nickled plated   Butane 300 5101  T1   Obsolete / Unavailable  The Nickled plated 5105-505 I have the gas tip is stamped T1 tip but the box is listing it as a 3 tip 3.575"   0.185" 0.250" 0.250" NA 1" of Asbestos type rope Brass filter screen nickle plated brass  
5107-5891 Propane    5107-a  T   Available  Has ferule for sealing gen to fuel valve 4.500"   0.185" 0.185" 0.185" NA none brass  
5114-5891 Propane  300 5114 5114A 5114A  TS   Available  Has ferule for sealing gen to fuel valve 4.190"   0.185" 0.185" 0.185" NA none brass  
5114B-5891 Propane  300 5114B  5179-700  TS   Available    3.560"   0.250" 0.250" 0.250" NA aluminum spring brass  
5120-5891 Butane 300 5120 F   Obsolete / Unavailable  Has built in roto cleaning lever Bottom 0.60" Angled 45 Degrees off center 4.800"   0.185" 0.185" 0.185" ? filter screen - cleaning rod  brass  
5122-5891 Propane 300 5122  I   Available  Has built in roto cleaning lever Bottom 0.60" Angled 45 Degrees off center 5.350"   0.185" 0.185" 0.185" ? filter screen - cleaning rod  brass
5414-299     5414       Replacement for the P5                
5417-299 Propane 300 5417 P        Obsolete / Unavailable  Replacement for the P3 3.925"   0.250" 0.250" 0.310" 3.955" tip cleaning rod steel spring & cardboard  brass
                               
                Coleman Iron Generators                        
Model Number  Fuel BTU  Iron Model   Gas Tip Stamp   Orafice Size Obsolete / Available   Building a Replacement & Notes Length ***   Dia @ Top Dia @ Body  Dia @ Bottom   Stuffing Material  Generator Material 
603-299 C Fuel   3,4,8-a,10,12  I   Obsolete / Unavailable  Can be replaced with 604-299 Can be built out of a T88 lantern gen, change tip to I 4.480"   0.185" 0.185" 0.185" 4.850" tip cleaning rod & steel spring  brass
604-299 C Fuel   3,4-a,8-a,10,12,603,609-a  I   Obsolete / Unavailable  Has built in roto cleaning lever 4.480"   0.185" 0.185" 0.185" 3.740" filter screen - cleaning rod  brass  & steel nut 
604-2991             Has built in roto cleaning lever U.S built                
605-299 Kerosene   611a D   Obsolete / Unavailable                   
611-299 Kerosene   611 EB   Obsolete / Unavailable    3.355"   0.250" 0.250" 0.250" 3.615" tip cleaning rod & steel spring  brass
                               
                Akron Lantern Generators                        
Model Number  Fuel Candle Power  Lantern Model   Gas Tip Stamp   Orafice Diam Obsolete / Available   Building a Replacement & Notes Length ***   Dia @ Top Dia @ Body  Dia @ Bottom Tip Cleaning Rod Length Stuffing Material  Generator Material 
? C fuel ? ? None   Obsolete  S shaped  for match preheating  The base of the generator is threaded and screws directly in to the fuel valve  4.230"   0.185" 0.185" 0.185" NA wire wound in asbestos brass
                               
                               
NOTES:
*   C  Gas tips in the T44 gen seem to work better in older 220-228s series lanterns than the V Gas tips with modern Fuels
**  252 Light output can be increased drastically by using 6 gas tip 99 mantle and removing plug from base of second air tube
***  Length variances of + or - 0.020" are not uncommon in 2991 suffex new unfired gens, especially the 335B-2991 gens
A.  All length mesurements made with out gas tip 
B.  All base measurements above flare unless noted   
C.  Unfilled areas are due to a lack of information (do not have one to document)
D.  All measurments made with examples on hand 
E. Most Gens ending in the 2991 Suffex are U.S built gens  while most the of the 299 suffex gens are Canadian built.  
F. Gens with a part number ie: 335B-2991 may have a larger Diameter and coarser thread on the gas tip  than gens
     with a model number  ie: G3 please be aware of this when building a replacement generator
G. Tip cleaning rod length is from base of rod to top of the pricker wire
        Please feel free to e-mail  me and help complete this list  or to bring to my attention any errors
                                                                                    matthewq4b@hotmail.com
All Input is appreciated
             A special thanks to Neil McRae & Mike Heymann. With out their help I would have never been able to do this.
                           To Neil for technical assistance and information     And Mike for being patient enough to school me on excel.
And to many others that have taken the time to make contributions to the list.  
Copyrighted 2008 Matthew Reid 
For personal use only no changes or modifications are allowed with out the consent of the Author.